Wethertex WB1 Weatherblocker
Wethertex WB1 Weatherblocker
Important Notice Regarding Wethertex Orders
Wethertex orders may experience longer lead times. To ensure accuracy, we recommend contacting us before placing your order. Our team will provide you with a more accurate estimated delivery date.
This is the perfect one stop solution for protecting your building from the damaging effects of penetrating damp. Developed using nano-technology, this clear, waterproof coating penetrates deep into brick or stone to give up to 25 years protection against damp without affecting the appearance of the substrate. Due to the deep
penetration into the substrate, WeatherBLOCKER is resistant to UV degradation and will retain its performance for many years.
PREPARATION
All surfaces should be clean, reasonably dry and free from algae, lichen & other growths and grease. If there is evidence of organic growth, power wash to remove & apply Wethertex C10 Fungicidal Wash in accordance with instructions. WeatherBLOCKER can take up to 7 days until full effects can be visible.
FEATURES
- Application by brush, roller or spray
- Apply at tempreture of 10 - 25 degrees for a minimum of 24 hours
- Suitable for concrete, stone, brick and renders
- Coverage: 5-10 square meters per litre dependant on porosity of the surface
- Supplied ready to use
- Can take up to 7 days until full effects can be visible
- Protect against against heavy rain, direct sunlight and high winds during first 24 hours. Protect with sheeting if necessary


-75023-p.png?w=200&h=200&v=96E9B95A-341D-4952-8727-9AE34955D22B)


