Typical dispatch 2-3 days on a 24hr service (excl. wknd’s). For expedited delivery please call us.

Menu

Technical Support Line 01753 684084

Wethertex HBS Flex-Coat Hi-Build Coating Standard Colours 15kg

Wethertex HBS Flex-Coat Hi-Build coating is a heavily textured, flexible masonry
paint, available in four stock colours
MPN: 305062
£65.49
£78.59 (inc. VAT)
African Ivory
Moon Stone
Butter Cream
Brilliant White
You can earn 78 loyalty points with this purchase
FacebookYoutubeInstagramPinterestLinkedIn

DESCRIPTION
Wethertex HBS Flex-Coat Hi-Build coating is a high quality, heavily textured, flexible masonry paint. Developed using advanced Optilife silicone technology, HBS offers outstanding breathability, is highly waterproof and will protect your building for up to 20 years. Due to its extreme flexibility, this one coat masonry paint is the perfect solution for the renovation of areas that are uneven, badly weathered or that have developed small cracks.

PACK SIZE
15kilos

PREPARATION
Make good cracks and structural defects. All surfaces must be clean, dry and free from algae, lichen & other growths. Any faults in the substrate/structure, particularly those that can lead to moisture penetration, must be rectified or can affect the finish quality. Any existing crazed or flaking paint, dirt, grease or other surface contaminants should be removed. For optimum performance apply to a substrate that has been primed with Wethertex ST1 Quick Dry Stabilising Primer. Scaffolding must be independently tied to allow for uninterrupted application.

APPLICATION
Stir the product thoroughly and do not contaminate. For application by hawk and trowel apply to 1-2mm thick and texture using a High Build application roller, or other texturing rollers or tools. For spray application, prime all areas to be decorated. For best results in terms of finish, coverage, speed of application and low over spray the following set up is recommended. Use a GC 200/24 2HP compressor or larger that can continuously deliver a maximum of 80psi at 4-5 cubic feet per minute on a 3 metre (max) length air-line to the spray gun. A GC 330
hopper feed spray gun with a 3mm air cap and tip size of 3-4mm. Apply at 40psi air flow/ spraying pressure with an 18” (450mm) distance from gun tip to the surface being coated.Cover areas not to be sprayed with masking tape and wet strength masking paper or film. Spray using a ‘cross hatch’ method, i.e. horizontally & vertically to achieve a full, uniform and even texture overall. Clean the tip and air cap frequently during use to prevent blocking. Apply all products in accordance with BS 6150: 2006 Code of Practice for painting of buildings and
BS 8000: Part 12: 1989 Code of Practice for decorative wall coverings and painting.

 IMPORTANT INFORMATION
The environmental climatic conditions for application and drying
are critical. The following conditions can negatively affect the
product performance and should be avoided, and taken into full
consideration in the first 24 hours after application:
• If frost or heavy rain is forecast
• Relative Humidity is above 85%
• In temperatures below 5ºC or above +25ºC
• If the substrate is hot (at above 30ºC) or below +1ºC
• Coverage rates are approximate and do not take into
account wastage and uneven substrates.

TOOL CLEANING
All equipment must be washed with clean, cold
water immediately after use. Waste material should
not be emptied in the drainage systems. Some local
authorities have special facilities for the disposal of
leftover paint. Please do not add any product into
drains or watercourses.

*Please note that all colours are displayed as accurately as the screen will allow. Please request a sample before final colour is accepted.

product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review
MPN:
305062
Brand:
Wethertex
Product Code:
305332
Weight:
16kg
Widget Image