Wethertex C10 Multi-surface Fungicidal Wash 5L
Wethertex C10 Multi Surface Fungicidal Wash is a ready to use, water based masonry wash for the removal of a broad range of bacterial, algal and fungal growth on masonry surfaces prior to painting. Developed using fast acting Bioactive Tec-nology, the product is particularly effective against algae and mould growth and creates a clean surface, ready for painting.
Important Notice Regarding Wethertex Orders
Wethertex orders may experience longer lead times. To ensure accuracy, we recommend contacting us before placing your order. Our team will provide you with a more accurate estimated delivery date.
-
Pack Size: 5L
-
Coverage: Approx. 3.2m² per litre dependant on substrate
-
Application Tool: Brush, Roller or Spray
- Suitable Substrates: Masonry and Wood
PREPARATION
Organic growths may indicate consistently damp conditions and substandard direct sunlight.
Sources of moisture should be identified and rectified to prevent recurrence. Condensation, rising damp, faulty plumbing or guttering, etc. should be considered as a possible source. Remove all loose and flaking material by cleaning the surface with a soft bristle brush. If possible, power wash the substrate with a suitable power washer.
APPLICATION
Apply C10 Multi-surface Fungicidal Wash directly onto the surface using a pressurised knapsack or garden sprayer but can be brush or roller applied. Ensure the surface is drenched in the wash and has been absorbed into the capillaries of the substrate. C10 Fungicidal Wash should be left for 24hrs to take effect and kill the growing moss and unseen spores. Dead growth should be removed by brushing with a steel brush or a suitable power washer.






