Thermoguard Wallcoat for walls & ceilings DISCONTINUED
-8442-p.jpg?v=1132021-121239)
Thermoguard Wallcoat for Painted Walls and Ceilings
A cost-effective solution to a serious problem
Inherently non-combustible surfaces such as plasterboard and brick can become a potential fire hazard due to repeated redecoration with conventional paints. Different paint types from a variety of manufacturers are typically used over many years with less than thorough preparation. In a fire thick layers of old paint tend to delaminate rapidly, catching and spreading fire around a building. In extreme cases a lethal 'flash-over' fireball effect is created.
The resultant risk to life and property can be greatly reduced at minimum cost using a combination of Thermoguard Wallcoat, an insulating intumescent barrier coating and Thermoguard flame retardant paint.
Description and use of Thermoguard Wallcoat
Thermoguard Wallcoat is an intumescent undercoat for applying to previously painted plaster, Artex, board, brick and concrete walls and ceilings. When overcoated with Thermoguard flame retardant paint it insulates old paint films from fire and controls the spread of flames along walls and ceilings.
To specify
Simply state:
Prepare and apply Thermoguard Wallcoat and Thermoguard flame retardant acrylic eggshell/vinyl matt/vinyl silk/anti-graffiti finish according to manufacturer's instructions
Application
Apply 1 coat Thermoguard Wallcoat at 8m2/litre plus either:
1 coat Thermoguard Flame Retardant Acrylic Matt at 10m2/litre:
or
2 coats Flame Retardant Acrylic Eggshell at 10m2/litre per coat:
or
2 coats Flame Retardant Anti-Graffiti or Hygiene Finish
at 10m2/litre.
Max Relative Humidity 75%
Min Temperature 6°C
Min Surface Temperature 3°C above dew point
Fire testing
Tested to:
BS476 Part 7; Class 1 surface spread of flame.
BS476 Part 6; Fire propagation.
Designated Class 0 in accordance with U.K. Building Regulations.
Intumescent and flame retardant fire
protection
When exposed to a fire Thermoguard flame retardant paint releases a flame extinguishing gas which instantly protects the surface.
Heat simultaneously activates the Thermoguard Wallcoat underneath, causing it to expand and create a protective barrier, insulating old paint films from heat and oxygen.
Finish and colour range
Full BS4800 + RAL colour range. Thermoguard Wallcoat can be tinted to match the finishing colour.
Thermoguard flame retardant paint is available in BS4800 + RAL colours, acrylic eggshell, acrylic matt, anti-graffiti and hygiene finishes.
Please refer to flame retardant paint data sheet.
A clear flame retardant anti-graffiti glaze is also available.
Fire certification
Thermoguard issues a Certificate of Supply upon request for each project for insurance, fire and building control authority and client records.
Call 01753 684084 or email info@tools-paint.com for more advice.
A cost-effective solution to a serious problem
Inherently non-combustible surfaces such as plasterboard and brick can become a potential fire hazard due to repeated redecoration with conventional paints. Different paint types from a variety of manufacturers are typically used over many years with less than thorough preparation. In a fire thick layers of old paint tend to delaminate rapidly, catching and spreading fire around a building. In extreme cases a lethal 'flash-over' fireball effect is created.
The resultant risk to life and property can be greatly reduced at minimum cost using a combination of Thermoguard Wallcoat, an insulating intumescent barrier coating and Thermoguard flame retardant paint.
Description and use of Thermoguard Wallcoat
Thermoguard Wallcoat is an intumescent undercoat for applying to previously painted plaster, Artex, board, brick and concrete walls and ceilings. When overcoated with Thermoguard flame retardant paint it insulates old paint films from fire and controls the spread of flames along walls and ceilings.
To specify
Simply state:
Prepare and apply Thermoguard Wallcoat and Thermoguard flame retardant acrylic eggshell/vinyl matt/vinyl silk/anti-graffiti finish according to manufacturer's instructions
Application
Apply 1 coat Thermoguard Wallcoat at 8m2/litre plus either:
1 coat Thermoguard Flame Retardant Acrylic Matt at 10m2/litre:
or
2 coats Flame Retardant Acrylic Eggshell at 10m2/litre per coat:
or
2 coats Flame Retardant Anti-Graffiti or Hygiene Finish
at 10m2/litre.
Max Relative Humidity 75%
Min Temperature 6°C
Min Surface Temperature 3°C above dew point
Fire testing
Tested to:
BS476 Part 7; Class 1 surface spread of flame.
BS476 Part 6; Fire propagation.
Designated Class 0 in accordance with U.K. Building Regulations.
Intumescent and flame retardant fire
protectionWhen exposed to a fire Thermoguard flame retardant paint releases a flame extinguishing gas which instantly protects the surface.
Heat simultaneously activates the Thermoguard Wallcoat underneath, causing it to expand and create a protective barrier, insulating old paint films from heat and oxygen.
Finish and colour range
Full BS4800 + RAL colour range. Thermoguard Wallcoat can be tinted to match the finishing colour.
Thermoguard flame retardant paint is available in BS4800 + RAL colours, acrylic eggshell, acrylic matt, anti-graffiti and hygiene finishes.
Please refer to flame retardant paint data sheet.
A clear flame retardant anti-graffiti glaze is also available.
Fire certification
Thermoguard issues a Certificate of Supply upon request for each project for insurance, fire and building control authority and client records.
Call 01753 684084 or email info@tools-paint.com for more advice.
Customer reviews
MPN:
THERMWALL25
Colour Chart:
Brand:
Thermoguard
Product Code:
THERMWALL25
Weight:
6kg
