Thermoguard Thermocoat Steel Fire Primer Solvent Based
Thermoguard Steel Fire Primer Oil Based
2.5 litre and 5 litre tins.
A high build which combined exceptional corrosion resistance , maximum grip to steel and previous primers and a permanently ideal surface intumescent paint adhesion.
Ideal for use under Thermocoat WI , Thermocoat WO & Thermocoat S intumescents, for a corrosion resistance in normal buildings or as part of a high corrosion restant system when overcoated with Thermoguard Flame Retardant Paints.
Designed for structural steel frames requiring full or partial fire protection with Thermocoat intumescent paint.
Steel and cast iron should be free from rust and millscale and primed with Thermoguard High Build Metal Primer to 75 microns DFT (or an alternative good quality anti-corrosive primer compatible with intumescent paints) in accordance with Thermoguard's instructions.
Galvanised steel should be degreased with a suitable etch primer such as Manor 1 Pack Etch Primer CT (see related products).
Thermoguard High Build Metal Primer May be left without further overcoating or it can be topcoated with an appropriate conventional paint where no fire resistance is required.Coverage: 6m2/L
Touch dry: 30mins
Application: brush, roller, spray
Call 01753 684084 or email info@tools-paint.com for more advice.
-82643-dv-p.jpg?w=1000&h=1000&v=84D4C911-8CB3-4F3F-9F8C-8D121892B1B4)
