Most of the products offered are dispatched within 2-5 working days. Some products are not available because of the current situation. Call us for up-to-date information.

Menu

Free Delivery On Orders Over £150. Technical Support Line 01753 684084.

Thermoguard Asbestos Encapsulating Coat

Customer review: "Found it to be a quality product which did the job exactly as described."
MPN: THERASBEC12S
£48.48
£58.18 (inc. VAT)



You can earn 58 loyalty points with this purchase
FacebookYoutubeInstagramPinterestLinked In
Thermoguard Asbestos Encapsulating Coat
Please note the 12m² and 50m² pack sizes are sufficient to cover the area specified with TWO coats.
Choose finish: Matt or Eggshell
Colour: White or chosen BS  or RAL colour - enter your preference in box provided

Product use
Thermoguard Asbestos Encapsulating Coat is designed to seal rigid asbestos inside buildings when it is sound, firmly adhered and not subject to mechanical damage, especially rigid asbestos in locations which are concealed and difficult to access, such as service ducts, roof and ceiling voids. It is ideal for use on roofs, garages, sheds, piping areas and boiler rooms etc.

Thermoguard Asbestos Encapsulating Coat can also be used to seal in difficult-to-remove, firmly bonded asbestos and loose isolated fibres which remain after primary rigid asbestos has been removed. It effectively prevents the release of asbestos and other fibres into the atmosphere by enveloping them. It permanently bonds residual asbestos fibres, after primary removal, to the surface to which they are attached or on which they lay.

Thermoguard Asbestos Encapsulating Coat helps prevent the surface spread of flame on non-combustible surfaces.

Thermoguard Asbestos Encapsulating Coat can be used in conjunction with Thermoguard Timbercoat or Wallcoat Intumescent Paints to upgrade combustible surfaces to Class 1 and Class 0 insulating intumescent barrier coating and Thermoguard flame retardant paint. Thermoguard Asbestos Encapsulating Coat is mid sheen, and is available in white and most BS and RAL colours (please enter your colour preference in the box above or contact us for assistance on colour availability). It is recommended that the colour be chosen to contrast with surfaces to be coated to assist in ensuring adequate coverage.

Product description
Thermoguard Asbestos Encapsulating Coat is a sealer coating based on a unique adhesive-grade resin. It is highly plasticised for outstanding flexibility so it can withstand normal movement within a building. It also incorporates flame retardant additives.
Thermoguard Asbestos Encapsulating Coat is water based, solvent free and low odour. It is safe and easy to use.

Application and spreading rate
Apply one coat of Thermoguard Asbestos Encapsulating Coat at 5m2 per litre by brush, roller, airless spray or HVLP spray. For ease and to coat inaccessible areas we recommend using an extension arm on the spray unit. For air-assisted spray, apply two thinned coats at 10m2 per litre per coat.
Ensure a continuous film has been created.

NOTE: If Thermoguard Asbestos Encapsulating Coat is to be used in conjunction with Thermoguard Timbercoat or Thermoguard Wallcoat, apply it directly over the Timbercoat or Wallcoat, in place of Thermoguard Flame Retardant Paint.

Friable asbestos
Friable asbestos that is impractical to remove should be sealed with one well thinned coat of Thermoguard Asbestos Encapsulating Smoke & Flame Retardant prior to application of 2 coats Thermoguard Asbestos Encapsulating Coat. Carry out test patch & test adhesion first.

Call us on 01753 684084 or email info@tools-paint.com for more advice.

Customer review: "Ordered asbestos encapsulating paint, which arrived 3 days later. Found it to be a quality product which did the job exactly as described."
MPN:
THERASBEC12S
GTIN:
5056230317666
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
 /  

Found it to be a quality product which did the job exactly as described.