Teroson UP 610

A universal unsaturated polyester body filler typically for marine applications. It repairs transom/stern damages, stress cracks, keel and rudder surfaces, redundant holes, engine mountings, damaged and pitted propellers, cracks and holes on hulls and superstructures, damages caused by osmosis or crazing, gaps between hull and deck and worn and damaged superstructures. Suitable for a wide variety of marine repairs above the waterline.

The surface area around the dent, scratch or hole must be clean, dry and free from oil, grease and loose particles. In case of rusty surfaces, the rust has to be removed to bare metal. The entire repair area should be sanded with a 120 grit abrasive. It is not necessary to remove the paint around the repair area, as long as the paint has good adhesion to the surface.

Apply the filler mixture onto the repair area in a way that the dent, scratch or hole is sufficiently filled. Thicker layers should be built up using multiple layers. Surface can be sanded after 15 to 20 minutes at room temperature.