Typical dispatch 2-3 days on a 24hr service (excl. wknd’s). For expedited delivery please call us.


Technical Support Line 01753 684084

PPG SigmaFast 205 LT (Sigmafast 278)

MPN: sigmafas205ltblack4l
£87.10 (inc. VAT)

You can earn 87 loyalty points with this purchase

PPG Sigma SigmaFast 205 LT (formerly Sigmafast 278) is a two component, high build, polyamide, zinc phosphate epoxy shop primer/coating for steel and concrete, which can be applied at temperatures as low as -5C.

SigmaFast 205 LT is for general exterior use and is touch dry in only three hours (75 microns at 10C, 18 hours at -5C), and is recoatable in 24 hours even at -5C.

Sigmafast 205 LT offers a tough, long-term flexible finish that is recoatable with most two component epoxy or polyurethane coatings.

It comes in a semi gloss finish and is available in many BS4800 and RAL colours.


  • Stir well before use
  • Easy application by airless spray, brush or roller also possible
  • Touch dry: 3 hours (at 10C)
  • Recoatable: 3 hours
  • Full cure after 5 days
  • Coverage: 9.3m2 per litre at 75 microns, 4.7m2 per litre at 150 microns
  • Volume solids: 70%
  • Recommended dry film thickness: 75-150 microns depending on system
  • Recommended thinner: 91-92

Call us on 01753 686888 or email info@tools-paint.com for more information.

Data sheet and MSDS available on request.

product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review
Colour Chart:
PPG Sigma
Product Code:
Widget Image