PPG Sigma Steelguard 751 White 20L
PPG Sigma Steelguard 751 is a one component, thin film, intumescent coating which gives structural steelwork two hours of protection against cellulosic fires.
Steelguard 751 is solvent based but is quick drying, offers short handling times and is good for both off-site or on-site application.
It is suitable for C1 to C4 internal and external environments (ISO 12944). No topcoat is required for dry internal (C1) environments. Steelguard 751 is weather resistant for up to 12 months without a topcoat, provided the coating has been applied in accordance with its data sheet and is not subject to running or pooling water, high humidity or immersion conditions.
Steelguard 751 can be applied at up to 1500 microns DFT in a single coat and comes in a white, matt finish.
Application (at 20C):
- Stir well before use
- Apply with airless spray (brush or roller for small areas only)
- Touch dry: 30 minutes
- Recoatable: 6 hours
- Coverage: 1.07m2 per litre at 700 microns
- Volume solids: 75%
- Recommended dry film thickness: 200-1500 microns per coat
- Recommended thinner: 21-06 (Amercoat 65). Normally no thinner required
Call us on 01753 686888 or email info@tools-paint.com for more information.
Data sheet and MSDS available on request.
