PPG Sigma Steelguard 564 White
PPG Sigma Steelguard 564 is a one component, thin film, intumescent coating which gives structural steel 120 minutes of protection against cellulosic fires.
Steelguard 564 is solvent based, quick drying, and is suitable for C1 to C4 internal and external environments. No topcoat is required for dry internal (C1) envirnments. It is good for on-site or off-site application in an industrial environment.
Steelguard 564 is weather resistant for up to 12 months without a topcoat, provided it is not immersed in water or exposed to high humidity.
It can be applied at up to 1000 microns DFT in a single coat and comes in a white, matt finish. It should not be applied below 5C or above 50C or it may not properly adhere to the surface.
Application (at 20C):
- Stir well before use
- Apply with airless spray (brush or roller for small areas only)
- Touch dry: 20 minutes
- Recoatable: 4 hours
- Coverage: 1.07m2 per litre at 700 microns
- Volume solids: 75%
- Recommended dry film thickness: 200-1000 microns per coat
- Recommended thinner: 21-06 (normally no thinner required)
Call us on 01753 686888 or email info@tools-paint.com for more information.
Data sheet and MSDS available on request.
