Typical dispatch 2-3 days on a 24hr service (excl. wknd’s). For expedited delivery please call us.


Technical Support Line 01753 684084

PPG Sigma Steelguard 554 White 20L

£469.26 (inc. VAT)
You can earn 469 loyalty points with this purchase

PPG Sigma Steelguard 554 is a one component, thin film, intumescent coating which gives structural steel 120 minutes of protection against cellulosic fires.

Steelguard 554 is solvent based, quick drying, and is suitable for dry, C1 to C4 internal and external environments without a protective topcoat. It is good for on-site or off-site application in an industrial environment.

Steelguard 554 is weather resistant for up to 12 months without a topcoat, provided it is applied according to information sheet 1222 and is not subject to running or pooling water, hot high humidity or immersion.

It can be applied at up to 1500 microns DFT in a single coat and comes in a white, matt finish. It should not be applied below 5C or above 50C or it may not properly adhere to the surface.

Application (at 20C):

  • Stir well before use
  • Apply with airless spray (brush or roller for small areas only)
  • Touch dry: 30 minutes
  • Recoatable: 6 hours
  • Coverage: 1.07m2 per litre at 700 microns
  • Volume solids: 73%
  • Recommended dry film thickness: 200-1500 microns per coat
  • Recommended thinner: 21-06

Call us on 01753 686888 or email info@tools-paint.com for more information.

Data sheet and MSDS available on request.

product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review
PPG Sigma
Product Code:
Widget Image