PPG Sigma Steelguard 2570 (FM 2570) White 20L

PPG Sigma Steelguard 2570 (FM 2570) is a one component, thin film, intumescent coating which gives structural steel 120 minutes of protection against cellulosic fires.

Steelguard 2570 is solvent based, quick drying, and is suitable for dry, C1 to C4 internal and external environments without a protective topcoat. It is good for on-site or off-site application in an industrial environment.

Steelguard 2570 can be applied at up to 700 microns DFT in a single coat and comes in a white, matt finish. It should not be applied below 5C or above 50C or it may not properly adhere to the surface.

Application (at 20C):

• Stir well before use
• Apply with airless spray (brush or roller for small areas only)
• Touch dry: 50 minutes
• Recoatable: 4 hours
• Coverage: 0.96m² per litre at 700 microns
• Volume solids: 67%
• Recommended dry film thickness: 200-700 microns per coat
• Recommended thinner: 21-06

Call us on 01753 686888 or email info@tools-paint.com for more information.

Data sheet and MSDS available on request.