PPG Sigma SigmaShield 2 (SigmaShield 825 LT, Amerlock 2 GF) 20L

PPG Sigma SigmaShield 2 (formerly SigmaShield 825 LT, Amerlock 2 GF) is a two component, high solids, glass flake reinforced, polyamide cured epoxy coating for steel and blasted steel, which can be applied at temperatures as low as 0C.

SigmaShield 2 offers long-term protection in industrial and marine exposures and excellent abrasion and impact resistance in areas subject to heavy wear and tear. It is highly suited for use on ice-going vessels and offers extremely good corrosion resistance that protects the surface from natural damage caused by the environment.

SigmaShield 2 is highly suited for use in marine environments to protect against water and chemicals, offering very low water permeability thanks to the glass flake barrier. It is suitable for immersion service.

SigmaShield 2 comes in an eggshell finish in black or light grey.

Price includes hardener.

Application (at 10C):

• Stir well before use
• Apply with brush, roller or spray
• Recoatable: 16 hours
• Full cure after 16 days
• Coverage: 4.4m² per litre at 200 microns
• Volume solids: 87%
• Recommended dry film thickness: 200-750 microns depending on system
• Recommended thinner: 21-06

Call us on 01753 686888 or email info@tools-paint.com for more information.

Data sheet and MSDS available on request.