Free Delivery On Orders Over £150. Phone orders and technical support 01753 684084

PPG Sigma SigmaPrime 200 20L

£295.19 (inc. VAT)
MPN: 211291
You can earn 295 loyalty points with this purchase

PPG Sigma SigmaPrime 200 is a two component, multipurpose, polyamide, anti-corrosive coating for use as the priming undercoat in epoxy paint systems.

SigmaPrime 200 offers excellent adhesion to steel, shop primers, galvanised steel and non-ferrous metals, giving them good adhesion, excellent abrasion, impact and chemical resistance. It is suitable for use in all vessel areas.

SigmaPrime 200 works well in a wide range of climatic conditions, cures well in extreme conditions and temperatures, and provides the ultimate protection from water damage and corrosion in industrial and coastal/marine environments.

SigmaPrime 200 comes in a grey or yellow-green, eggshell finish.

Application (at 20C):

  • Stir well before use
  • Apply with spray, brush or roller
  • Touch dry: 1.5 hours
  • Recoatable: 2.5 hours
  • Full cure after 7 days
  • Coverage: 6.0m2 per litre at 100 microns
  • Volume solids: 60%
  • Recommended dry film thickness: 100-200 microns per coat
  • Recommended thinner: 91-92 (no thinner needed for brush/roller)

Call us on 01753 686888 or email for more information.

Data sheet and MSDS available on request.

Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.