PPG Sigma SigmaGlide 790 20L
PPG Sigma SigmaGlide 790 is a two component, silicone based tiecoat for fouling release systems that can be used on any new build or maintenance project on ships and appliances that intake sea water.
SigmaGlide 790 is part of a system that protects surfaces from fouling caused in a marine environment, providing adhesion to SigmaGlide finishes that can be applied over a number of systems.
It comes in a semi-gloss, medium grey finish.
Sigmaglide 790 can be applied using airless spray to achieve a finish with a theoretical coverage rate of 5-6m2 per litre and produces a.
Application (at 20C):
- Stir well before use
- Apply with airless spray (brush/roller for small, touch-up and repairs)
- Touch dry: 30 minutes
- Recoatable: 6 hours
- Coverage: 5.3m2 per litre for 150 microns
- Volume solids: 79%
- Recommended dry film thickness: 150 microns
- Recommended thinner: do not thin
Call us on 01753 686888 or email email@example.com for more information.
Data sheet and MSDS available on request.