PPG Sigma SigmaFast 213 20L

PPG Sigma SigmaFast 213 is a two component, high build, polyamine cured, vinyl epoxy primer or build coat for protecting steel structures in strong atmospheric conditions.

SigmaFast 213 is ideal for use on steel that is dry and has been thoroughly cleaned. Once applied the surface will be tough and flexible, and will maintain its high quality appearance without cracking or flaking even if the building moves in atmospheric conditions.

It is fast drying and cures at temperatures as low as -5C.

SigmaFast 213 comes in a flat, grey colour.

Application:       

• Stir well before use
• Apply with brush, roller or spray
• Touch dry: 50 minutes (at 20C)
• Recoatable: 45 minutes
• Coverage: 7.5m² per litre at 80 microns, 3.3m² per litre at 180 microns
• Volume solids: 60%
• Recommended dry film thickness: 80-180 microns depending on system
• Recommended thinner: 21-06

Call us on 01753 686888 or email info@tools-paint.com for more information.

Data sheet and MSDS available on request.