PPG Sigma SigmaDur Clearcoat 4L
PPG Sigma Sigmadur Clearcoat is a two component, abrasion resistant, aliphatic clear acrylic polyurethane gloss finish for aluminium pigmented polyurethanes, stainless steel and non-ferrous materials that are not subject to immersion.
Sigmadur Clearcoat offers excellent gloss retention and a tough finish which resists the splash of mineral and vegetable oils, white spirit, paraffin, aliphatic petroleum products and mild chemicals. It also benefits from reduced sensitivity to early condensation and rain.
It can be recoated even after long atmospheric exposure and cures at temperatures as low as-5C.
Price includes hardener.
- Stir well before use
- Apply with brush, roller or air spray
- Touch dry: 1 hours (at 20C)
- Recoatable: 12 hours
- Full cure after 7 days
- Coverage: 14.3m2 per litre at 35 microns
- Volume solids: 50%
- Recommended dry film thickness: 35-50 microns depending on system
- Recommended thinner: 21-06
Call us on 01753 686888 or email email@example.com for more information.
Data sheet and MSDS available on request.