PPG Sigma EP 112 Miocoat (Amercoat 4613)
PPG Sigma EP 112 Miocoat (formerly Amercoat 4613) is a two component, high solids, micaceous iron oxide, polyamine epoxy coating, for general purpose use on steel and concrete structures as part of protective coating systems exposed to the weather.
EP 112 Miocoat is designed for steel and concrete structures that are exposed to coastal, marine and industrial environments where atmospheric conditions can damage the substrate.
It offers excellent adhesion on bare or previously painted substrates and can be applied to vertical or horizontal surfaces.
EP 112 Miocoat is Highways Agency Approved Item no 112 and comes in a dark or light grey, eggshell finish.
Price includes hardener.
Application (at 20C):
- Stir well before use
- Apply with spray, brush or roller
- Touch dry: 2 hours
- Recoatable: 8 hours
- Full cure after 7 days
- Coverage: 7.0m2 per litre at 100 microns
- Volume solids: 70%
- Recommended dry film thickness: 75-150 microns depending on system
- Recommended thinner: 91-92
Call us on 01753 686888 or email firstname.lastname@example.org for more information.
Data sheet and MSDS available on request.