PPG Sigma Amercoat 385

PPG Sigma Amercoat 385 is a two component, high build, polyamide epoxy with high solids content, for industrial and marine use.

Amercoat 385 adheres well to steel, aluminium, stainless steel, concrete and all previously coated surfaces, offering excellent durability and toughness when exposed to high wear conditions.

It can be used internally or externally to produce a high quality, decorative and protective surface layer, and when used externally it gives surfaces a coating which is highly resistant to chemicals and weathering.

Amercoat 385 can be used over all inorganic zinc primers and because it is self priming it can be applied to bare surfaces to offer economical, long-term protection.

Amercoat 385 is waterproof, making it suitable for immersion in water for long periods typical in the marine environment. It is commonly used on decks, hulls, superstructures and the ballast tanks of ships and barges. Amercoat 385 can also be applied to tank exteriors, structural steel pipes, refineries and in waste water treatment plants.

Amercoat 385 comes in four colours in a flat finish.

Price includes hardener.

Application (at 20C):

• Stir well before use
• Apply with spray, brush or roller
• Touch dry: 2 hours
• Recoatable: 12 hours
• Full cure after 6 days
• Coverage: 5.4m² per litre at 125 microns
• Volume solids: 68%
• Temperature resistance (continuous): 93C
• Temperature resistance (intermittent): 121C
• Recommended dry film thickness: 75-200 microns depending on system
• Recommended thinner: 91-92, 21-06 (Amercoat 65), or 21-25 (Amercoat 101)

Call us on 01753 686888 or email info@tools-paint.com for more information.

Data sheet and MSDS available on request.