Manor QD One Coat Gloss Custom Mixed Colours 5L
-43775-p.jpg?v=522c2a3c-e260-474c-94b8-d40c7ba7986f)
Mixed in house to any colour reference - please enter your colour reference above
A rapid drying high performance 'one coat', anti-corrosive, self priming glossy topcoat, giving a tough flexible film with remarkable adhesion to many difficult substrates. VOC Classification 2004/42 Cat A(i) = 500g/L.
Typical uses are:
Metal Railings and Fencing; adheres directly to galvanised metal or steel with no need for mordant solutions or etch primers.
Galvanised or steel structures subject to high humidity; such as steel roof trusses in swimming pools.
For maximum corrosion protection and adhesion prime with Hi-Build Vinyl then overcoat with Q.D. One Coat Gloss.
Not suitable for use in areas subject to chemical / solvent attack.
ARTICLES - that are not part of a building structure (and are therefore outside the scope of the building products VOC Product Directive)
Typical uses are: machinery, process steelwork, fixed plant, exteriors of piplelines and tanks; for areas exposed to high humidity and certain chemicals (seek advice from Manor Coating Systems Technical Department). For maximum corrosion protection and adhesion prime with Hi-Build Vinyl then overcoat with Q.D. OneCoat Gloss. Not suitable for use in areas subject to chemical / solvent attack
METAL FINISHING
Used as a topcoat for Hi-Build Vinyl or as a rapid dry 'one coat' anti corrosive self priming glossy topcoat, giving a tough flexible film with remarkable adhesion to many difficult substrates with excellent re-coat characteristics.
Typical uses are:
General Metal Fabrication; used to overcome problems associated with conventional alkyd paints subject to severe exposure conditions often associated with poor adhesion.
Wrought ironwork fabrication, applied direct with no need for a mordant or etch primers
Metalwork subject to low temperatures, Q.D. One Coat Gloss remains flexible
Metalwork subject to high humidity
Not suitable for use in areas subject to chemical / solvent attack
For maximum corrosion protection and adhesion prime with Hi-Build Vinyl then overcoat with Q.D. OneCoat Gloss.
NICHE END USES ON SOME PLASTICS
Some rigid and flexible plastics; such as Foamex and PVC. Always test prior to painting. Seek advice from Manor Coating Systems Technical Department. See also the Manor supplementary information sheet 'Guide to the UK VOC legislation' to understand how the VOC content of a coating determines its suitability for use in any application.
Not suitable for use in areas subject to chemical / solvent attack
Product advice for use with cladding on request 01753 684084.
Often used as a glossy version of High Build Vinyl product. Intended use for the decoration of buildings.A rapid drying high performance 'one coat', anti-corrosive, self priming glossy topcoat, giving a tough flexible film with remarkable adhesion to many difficult substrates. VOC Classification 2004/42 Cat A(i) = 500g/L.
Typical uses are:
Metal Railings and Fencing; adheres directly to galvanised metal or steel with no need for mordant solutions or etch primers.
Galvanised or steel structures subject to high humidity; such as steel roof trusses in swimming pools.
For maximum corrosion protection and adhesion prime with Hi-Build Vinyl then overcoat with Q.D. One Coat Gloss.
Not suitable for use in areas subject to chemical / solvent attack.
ARTICLES - that are not part of a building structure (and are therefore outside the scope of the building products VOC Product Directive)
Typical uses are: machinery, process steelwork, fixed plant, exteriors of piplelines and tanks; for areas exposed to high humidity and certain chemicals (seek advice from Manor Coating Systems Technical Department). For maximum corrosion protection and adhesion prime with Hi-Build Vinyl then overcoat with Q.D. OneCoat Gloss. Not suitable for use in areas subject to chemical / solvent attack
METAL FINISHING
Used as a topcoat for Hi-Build Vinyl or as a rapid dry 'one coat' anti corrosive self priming glossy topcoat, giving a tough flexible film with remarkable adhesion to many difficult substrates with excellent re-coat characteristics.
Typical uses are:
General Metal Fabrication; used to overcome problems associated with conventional alkyd paints subject to severe exposure conditions often associated with poor adhesion.
Wrought ironwork fabrication, applied direct with no need for a mordant or etch primers
Metalwork subject to low temperatures, Q.D. One Coat Gloss remains flexible
Metalwork subject to high humidity
Not suitable for use in areas subject to chemical / solvent attack
For maximum corrosion protection and adhesion prime with Hi-Build Vinyl then overcoat with Q.D. OneCoat Gloss.
NICHE END USES ON SOME PLASTICS
Some rigid and flexible plastics; such as Foamex and PVC. Always test prior to painting. Seek advice from Manor Coating Systems Technical Department. See also the Manor supplementary information sheet 'Guide to the UK VOC legislation' to understand how the VOC content of a coating determines its suitability for use in any application.
Not suitable for use in areas subject to chemical / solvent attack
Customer reviews
MPN:
MANORQDONECOAT
Colour Chart:
Brand:
Manor
Product Code:
ManorQD1CoatGloss
Weight:
6kg
