Most orders are dispatched within 2-3 days on a next day service (excluding weekends). Expedited deliveries are possible. Call us for more information.


Technical Support Line 01753 684084

Manor 2 Pack Epoxy Thinner 5L

MPN: Manor2Pkepoxythin5
£42.85 (inc. VAT)
You can earn 42 loyalty points with this purchase
Manor 2 Pack Epoxy Thinner 5 Litres

Manor 1 Pack Polyurethane Brilliant White 5 Litres is a single pack, air drying, high gloss finish which is often used for spraying large commercial vehicles when a long wet edge or open time is beneficial, particularly if sprayshop temperatures rise above 25C. See related products for custom mixed colours or quick dry versions.

Intended use
Vehicle refinishing and the original coating of vehicles or trailers. Used as a refurbishment or maintenance coating for items such as machinery, fixed plant, moveable equipment, forklift trucks, trolleys, frames, guards etc, exterior surfaces of tanks, pipework and process plant, towers, bridges or any structure which is not part of a building, narrow boats (externally above the water line), classic vehicles, tractors, traction engines, coaches, buses, trucks and steam engines.

  • High gloss, hard wearing and resistant to most common cutting oils and some mild chemicals
  • Longer drying and wet edge times compared to 1 Pack Polyurethane QD, and with less tendency for 'dry or over spray'
  • Excellent for applying by brush
  • For spray application prime/undercoat with Manor UPF, and for brush application prime/undercoat with Manor CV Primer Undercoat
  • Previously painted glossy surfaces should be abraded prior to painting/priming/undercoating, in order to gain adhesion
  • Aluminium and galvanised steel should first be pre-treated with Manor Wash Primer, Manor Chromate Free Wash Primer or Manor 1 Pack Etch Primer CT
  • For an extensive range of colours from the Manormix mixing scheme please see related products
  • Typical film thickness: 40 microns dry at 80 microns wet
  • Theoretical coverage: 12.5m2 per litre at 40 micons dry film thickness
  • Touch dry (20C): 3 hours
  • Recoat (20C): 16 hours minimum, 7 days maximum
Contact us on or 01753 684084 for further advice or for product data sheet.
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.