Manor 1 Pack Etch Primer CT
Manor 1 Pack Etch Primer CT is a single pack etch primer for improving adhesion on non-ferrous metals, suitable for use on many metals, particularly steel, galvanised steel, zintec and aluminium. If used on steel when an automotive finish is required in terms of adhesion and corrosion resistance, it should then be overcoated with a standard primer, undercoat and topcoat.
Intended use
Metal finishing, vehicle refinishing and the original coating of vehicles or trailers.
Features:
Intended use
Metal finishing, vehicle refinishing and the original coating of vehicles or trailers.
Features:
- Excellent adhesion
- Rapid drying
- May be used as a weld through holding primer
- In black it is often used as a primer/finish on items used internally
- Can be overcoated with a wide range of single and two pack topcoats or powder coating
- Typical film thickness: 10-15 microns
- Theoretical coverage: 12m2 per litre at 12 micons dry film thickness
- Touch dry (20C): 10 minutes
- Recoat (20C): 1 hour minimum, 8 hours maximum
- Must be overcoated the same day with the appropriate primer or topcoat. If 1 Pack Etch Primer CT has to be left for more than 24 hours before recoating, lightly abrade film to improve intercoat adhesion. Black may be left unpainted as an internal finish.
MPN:
1PKETCHB1L
Brand:
Manor
Product Code:
1PKETCHB1L
Weight:
1.5kg