ISF RP1 (PU) Polyurethane 2K Topcoat White 5L
5L Isf Rp1 Pu White 5L including cure
Mix 4:1 with RP1 No.1 Catalyst for Top Coats
Features
- Exceeds BS 6250 Severe Use rating
- High opacity formulation. Excellent water resistance
- Good flow & film clarity produces a superbly smooth finish
- Easily re-coatable for speedy production
Uses: High quality interior joinery, furniture & plastics.
RP1 system
Topcoat: RP1 (Fast Dry PU) 5%-90% sheen RP1-9WH0XX-005
Topcoat Catalyst: RP1 No.1 Catalyst for Top Coats 1L RP1-8-NO.01-001
Basecoat: RP1 (PU) Primer Black RP1-7-BL010-005
RP1 (PU) Primer Charcoal RP1-7-CH010-005
RP1 (PU) Primer Grey RP1-7-GR010-005
RP1 (PU) Primer White RP1-7-WH010-005
Basecoat Catalyst: No.2 Cat for Primer 1L RP1-8-NO.02-01 RP1
Thinner for system: RPT (PU) System Thinners RPT-9-TH000-005
Application Equipment: Conventional airless / airmix or HVLP spray equipment.
APPLICATION
Mix 4 Parts RP1 Part A with 1 Part RP1 Catalyst (No.1 for top coats). Once catalysed, thinners not normally necessary, however RPT thinners may be used if required up to a maximum of 10% by volume. Apply a light coat of RP1 Primer, allow to dry.Then after a further de-nib apply a full even coat of the RP1 top coat & allow to dry.
FURTHER INFORMATION
When force drying, 30 mins flash off (Very important to avoid increased gloss levels), 60 mins at 35-40c then 30 mins air cooling before sanding. Temperature times will vary with coating thickness. As the catalyst contains isocyanate the use of air-fed masks is required whilst spraying. Please ensure that the total system dry film thickness (DFT) does not exceed 150 microns. Always lightly sand between coats to assist adhesion. Maximum 2 coats in any 8 hours. Catalyst should be used within 6 weeks of delivery. Once opened, Catalyst MUST be used within 7 days
- Coverage: 8-10 sq.m/L
- Touch dry: 15 min
- Recoat time: 60 min
- Max Resistance: 7 days
- Pot life: 8h
- Mix ratio: 4:1
