ISF RP1 (PU) Polyurethane 2K Primer 5L
ISF RP1 (PU) Polyurethane Two Pack Primer 5L (includes cure)
|
Part of RP1 POLYURETHANE SYSTEM
Promatch® - Two Component PU |
ISF Promatch - computerised colour matching to over 50,000 shades.
|
|
USES
|
High quality interior joinery & furniture. | |
|
TOPCOAT
|
RP1 (PU) Promatch Metallic RP1 (PU) Promatch Textured RP1 (PU) Promatch SPECIAL to Pattern RP1 (PU) Black RP1 (PU) White |
|
|
BASECOAT
|
RP1 (PU) Primer Charcoal RP1 (PU) Primer Grey RP1 (PU) Primer White |
|
|
THINNERS
|
RPT (PU) System Thinners | |
|
CLEANER
|
ISF Spray Gun Cleaner | |
|
EQUIPMENT
|
Conventional airless / airmix or HVLP spray equipment. | |
|
APPLICATION
|
TOPCOAT: Mix 4 Parts RP1 Top Coat with 1 Part B (No.1 for Pigmented Top Coats). PRIMER: Mix 4 Parts RP1 Primer with 1 Part B (No.2 for Pigmented Primer). Once catalysed, thinners not normally necessary, however RPT thinners may be used if required up to a maximum of 10% by volume. Apply a light coat of RP1 Primer, allow to dry.Then after a further de-nib apply a full even coat of the RP1 top coat & allow to dry. This product contains isocyanates. | |
|
INFORMATION
|
As the catalyst contains isocyanate the use of air-fed masks is required whilst spraying & mixing. Please ensure that the total system dry film thickness (DFT) does not exceed 150 microns. Always lightly sand between coats to assist adhesion. Maximum 2 coats in any 8 hours.Catalyst should be used within 6 weeks of delivery. Once opened, Catalyst MUST be used within 7 days. |
Customer reviews
MPN:
ISFRP1PRIMERWHITE5L
Brand:
Isf
Product Code:
ISFRP1PRIMERWHITE5L
Weight:
6kg
