ISF RP1 (PU) Polyurethane 2K Basecoat Sealer 5L
ISF RP1 (PU) Polyurethane 2 Pack basecoat Sealer Clear + cure 5 Litres
|
Part of RP1 POLYURETHANE SYSTEM (Basecoat)
Clear Two Component Lacquer (BS 6250) |
|
|
USES
|
High quality interior joinery & furniture. | |
|
TOPCOAT
|
RP1 (PU) Clear 25% Sheen RP1 (PU) Clear 35% Sheen RP1 (PU) Clear 50% Sheen RP1 (PU) Clear 90% Sheen |
|
|
BASECOAT
|
|
|
|
THINNERS
|
RPT (PU) System Thinners | |
|
CLEANER
|
ISF Spray Gun Cleaner | |
|
EQUIPMENT
|
Conventional airless / airmix or HVLP spray equipment. | |
|
APPLICATION
|
Mix 4 Parts RP1 Part A with 1 Part RP1(No.3 for Clears) Catalyst. Apply a light coat of RP1 Sealer, allow to dry, de-nib & apply another sealer coat as necessary. Then after a further de-nib apply a full even coat of the RP1 Top Coat & allow to dry. This product contains isocyanates. | |
|
INFORMATION
|
Please ensure that the total system film thickness (DFT) does not exceed 150 microns. Always lightly sand between coats to assist adhesion. Maximum 2 coats in any 8 hours. As the catalyst contains isocyante the use of air-fed masks is required whilst spraying & mixing.Catalyst should be used within 6 weeks of delivery. Once opened, Catalyst MUST be used within 7 days. |
Colour : Clear
Touch Dry : 15-20 Mins - Recoat 60 Mins
Coverage : 8-10 sq mtrs per litre
Ratio : 4:1
Pot Life : 8 Hours
Thinner : RPT PU Thinner
MPN:
RP1-4-SE010-005
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.
