ISF FLAMEPRO FP2 Low Odour Furniture Flame Retardant Topcoat 5L
|
FLAMEPRO FP2-Lo
Clear Two Pack Class 1 / Class 0 Flame Retardant Lacquer |
|
|
USES
|
Interior joinery & furniture. | |
|
TOPCOAT
|
FLAMEPRO FP2-Lo Clear Class1/0 25% FLAMEPRO FP2-Lo Clear Class1/0 35% Sheen FLAMEPRO FP2-Lo Clear Class1/0 50% Sheen FLAMEPRO FP2-Lo Clear Class1/0 90% Sheen |
|
|
BASECOAT
|
|
|
|
THINNERS
|
18805 FPT Thinners FLAMEPRO FPT Virgin Thinners FLAMEPRO FPT Anti Bloom Thinners |
|
|
CLEANER
|
ISF Spray Gun Cleaner | |
|
EQUIPMENT
|
Conventional airless / airmix or HVLP spray equipment. | |
|
APPLICATION
|
Mix 9 Parts FP2-Lo Part A with 1 Part FP2-Lo Catalyst. Apply a light coat of FP2 Sealer, allow to dry, de-nib & apply another sealer coat as necessary. Then after a further de-nib apply a full even coat of the FP2-L0 Top Coat & allow to dry. Once catalysed, thinners not normally necessary, however FPT thinners may be used if required up to a maximum of 5% by volume. Leave to dry overnight prior to packing. Copies of the test reports are available on request. | |
|
INFORMATION
|
Please ensure that the total system film thickness (DFT) does not exceed 150 microns. Always lightly sand between coats to assist adhesion. Maximum 2 coats in any 8 hours. FLAMEPRO FP2-Lo will not up-grade to Class 1 or Class 0 rating - it will only maintain the rating of the substrate. Please allow 28 days prior to testing to BS 476. |
MPN:
ISFFP2_10_5L
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.
