ISF AC2 2K Top Coat Custom Mixed Colours

The AC2 range contains virtually no formaldeyde which is a major improvement in spray shop safety. Its waxy feel formulation improves marr resistance. This product is easily recoatable has excellent opacity and the high solids reduce the coats required.

• Low odour - Butanol free formulation
• Less than 0.1% Formaldehyde content - improves Spray Shop safety
• Excellent opacity. High solids, reduces coats required
• BS FIRA 6250 Severe use rating
• Colour: Enter your colour reference in box provided. BS, RAL and many other colour schemes available - contact us for further assistance. For clear please see related products.

AC2 Catalyst included.

Recommended primer: ISF AC2 Low Odour Primer Filler 5L (see related products)

Recommended Tinners: ACT Acid-Cat Thinners, No 31 Anti Bloom Retarding Thinners

Application equipment: Conventional airless / airmix or HVLP spray equipment.

Application : Application mix ratio - Mix 9 Parts AC2-Lo Part A with 1 Part AC2-Lo Catalyst. Apply a light coat of AC2 Primer, allow to dry, de-nib & apply another Primer coat as necessary. Then after a further de-nib apply a full even coat of the AC2-Lo Top Coat. Once catalysed, thinners not normally necessary, however ACT thinners may be used if required up to a maximum of 10% by volume. Allow to dry overnight prior to packing.

AC2-Lo should not be used over PC1 Range Pre-catalysed Primers.

Product and Safety Data Sheets available on request