ISF AC2 2K Clear Top Coat Lacquer Clear 5L
ISF AC2 2K Clear Top Coat Lacquer Clear 5L inc.catalyst (cure). Low Odour
- Butanol Free - low odour formulation
- Less than 0.1% Formaldehyde content - improves Spray Shop safety
- Waxy feel formulation. BS 6250 Severe Use rated
- Good flow & film clarity. Easily re-coatable
USES: Interior joinery & furniture.
TOPCOAT
CA2-3-CL005-005 AC2-Lo 18603 Clear DEAD MATT
CA2-3-CL010-005 AC2-Lo (low odour) Clear 10% Sheen
CA2-3-CL025-005 AC2-Lo (low odour) Clear 25% Sheen
CA2-3-CL035-005 AC2-Lo (low odour) Clear 35% Sheen
CA2-3-CL050-005 AC2-Lo (low odour) Clear 50% Sheen
CA2-3-CL090-005 AC2-Lo (low odour) Clear 90% Sheen
CATALYST
CA2-8-19876-0.5 AC2-Lo (low odour) Catalyst (500ml)
BASECOAT
CA2-4-SE010-005 AC2-Lo (20251) Basecoat Sealer Clear
THINNERS
ACT-9-TH000-005 ACT Acid-Cat Thinners
CL2-9-TH031-005 No 31 Anti Bloom Retarding Thinners
APPLICATION EQUIPMENT Conventional airless / airmix or HVLP spray equipment
APPLICATION
MIX RATIO - Mix 9 Parts AC2-Lo Part A with 1 Part AC-Lo Catalyst. Apply a light coat of AC2- Lo Sealer, allow to dry, de-nib & apply another sealer coat as necessary. Then after a further de-nib apply a full even coat of the AC2-Lo Top Coat. Once catalysed, thinners not normally necessary, however ACT thinners may be used if required up to a maximum of 10% by volume. Allow to dry overnight prior to packing. AC2-Lo Lacquer may be used Coat on Coat. Do not use over pre-catalysed basecoats. For colour shading AC2-Lo may be tinted with 'ISF 300 Range Woodstain', up to a maximum 5% by volume.
FURTHER INFORMATION
The new ISF range of AC2-Lo lacquers are now classed 'Lo-Formadehyde' – as such they are a major Health & Safety development. Formaldehyde is deemed to be carcinogenic and a risk to end user. Our unique manufacture process removes the formaldehyde from both the Part A & B components to make these lacquers MUCH SAFER to use. The actual levels are under 0.1% which is a major breakthrough in Acid Catalysed technologies. Using ISF AC-Lo Systems the working environment within any Spray Shop will be dramatically improved. A further improvement in the formulation of these lacquers has also been made. All the butanol (a very pungent solvent) has been removed - this vastly improves the “smell” whilst drying, making them into low odour lacquers. All AC-Lo systems are SAFER & MORE PLEASANT to use. Please ensure that the total system film thickness (DFT) does not exceed 150 microns. Always lightly sand between coats to assist adhesion. Maximum 2 coats in any 8 hours. Cleaning and Maintenance: Clean regularly with a soft dry cloth. When needed wipe with a moist cloth. Neutral cleaning detergents or household cleaners with low amounts of alcohol or waxes can also be used.
- Coverage: 9-11 sq. m/L
- Touch dry: 15-20 min
- Recoat time: 60 min
- Max resistance: 7 days
- Pot life: 36h
- Mix ratio: 9:1
- Shelf life: 12 month
- Colour: Clear - for White and Custom Mixed Colours please see related products.
