Hydron Nu-Guard Tack Primer 5L

DESCRIPTION:
Nu-Guard Tack Primer is a high performance water soluble, epoxy coating.

ADVANTAGES:
Provides first class adhesion to properly prepared surfaces.

USES:
First coat of the Nu-Guard AG System. Developed to act as a tack primer over existing coatings and non
porous substrates including glazed tiles.

COLOUR: Off White.
PACK SIZE: Two component product, supplied in 5 litre units.
VOLUME SOLIDS: 40%
COVERAGE RATE: 8 m² / Litre
DRYING TIME: Touch :3-4 h, Overcoat :8 h

PREPARATION:
Ensure surfaces to be treated are clean, free from contamination and dry. Previously coated surfaces
should be abraded.

APPLICATION:
By brush/roller or spray. Should not be applied at temperatures below 5°C or when the relative
humidity exceeds 85%.

EQUIPMENT CARE:
All equipment should be cleaned with water immediately after use.

STORAGE:
Store away from direct sunlight and sources of heat.
Protect from frost.

SHELF LIFE: 12 months (in original sealed container).

HEALTH & SAFETY: Refer to MSDS