HMG PVC17

PVC17 is a single pack, Vinyl Acrylic with exceptional flexibility and adhesion. HMG PVC 17 is suitable for coating most PVCu, hard plastics (not GRP) and powder-coated surfaces (architectural cladding). A small trial should be carried out in a localised area to ensure adhesion and compatibility with the surface.

Available in a gloss, satin and matt sheen.

Application; Spray or brush

Special; In cases where large areas are being sprayed and where the temperature is exceeding 25 degrees C, 2604 slow thinner may be used to increase wet edge time. PVC curtain material and other flexible substrates are best coated after they have been aired, to ensure that any trapped plasticisers can escape. These need to be released/removed from the surface to ensure correct adhesion and drying of PVC 17. Failure to remove plasticiser will cause adhesion and drying problems. New PVC curtain material and other flexible substrates should be exposed to the atmosphere for at least 7 days to ensure optimum adhesion and drying performance

Thinner 2661 or 2604

Touch dry in 15mins at 20oC

Available in B.S., RAL and most recognised colour standards

Suggested primers

Typical usages. UPVc windows and doors, Curtain side lorries, and many other plastic coating applications.