HMG Flexithane Single Pack Flexible Polyurethane Coating Standard Colours
A highly flexible polyurethane coating with excellent adhesion properties on difficult substrates such as PVC, PU elastomer, rubber variants, fabrics and leather. Flexithane can be cross-linked with isocyanate hardener 9002 (using 10% by volume of hardener before thinning). The hardener is supplied separately and added immediately prior to using the paint. The pot life once the hardener is added is 8 hours.
Typical areas of usage would be vehicle restoration or customisation. This product can be used on seating and upholstery, bringing a new look to old & tired interiors. Also suitable for lorry curtain sides.
Coverage: 20 square metres per litre @ 15 microns dft
Storage: Store between 5°C - 25°C. When not in use, cans must be kept sealed
Shelf Life: 12 months from delivery date in original sealed containers
Maximum VOC Content: 0.8kg/L
Regulations: 2004/42 IIB (E) 840
Flexithane is available in a large range of matched to request colours. Choose your colour and size from the menu above or see related products for custom mixed colours. Please note that white is only available in 5L tins. Sheen level is semi-gloss.
Application via Spray, Brush in very small areas due to the speed of drying.
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants. HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process. Please refer to our website for Knowledge Base article Prep-Cleaning Techniques (KNB0009) and Preparatory Cleaners from the Product Guide.
Technical Data Sheet and MSDS are available on request