HMG C71 Speedline 170C Custom Mixed Colours

A high quality 2 hour synthetic alkyd enamel which offers fast surface cure, good through drying even in thick films and outstanding film hardness and toughness.C71Speedline can be used for heavy duty vehicle finishing, as well as for vehicle repair work. It has good resistance to oils, fats, and cutting oils etc, which makes this an ideal choice for machinery enamel.

Yellowing is minimal even after prolonged exposure to higher temperatures. Can be used on surfaces up to  170 degrees centigrade such as engine blocks.Not for use on manifolds etc.

SPECIAL PROPERTIES
Quick drying Agricultural Paint
Quick drying Appliance Paint
Quick drying Machinery Paint

Application, Brush, roller and spray.

MAXIMUM VOC CONTENT
0.45kgs/ltr

REGULATIONS / COMPLIANCE
Out of Scope

COLOUR RANGE
Available in a wide colour range including RAL & BS shades - please enter your colour reference above

TECHNICAL INFORMATION
FLASHPOINT: 38°C
TEMP RESISTANCE: 170°C
STORAGE: 12 months in original sealed containers

CLEANING
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.

HMG produce a full range of cleaners, silicone removers, degreasers and preparatory cleaners suitable for the cleaning process.

SUGGESTED PRIMER / FILLER / SEALER SYSTEMS
Synthetic BDX Primer
Synthetic High Opacity Undercoat
Typical usages, Gates & Railings, garden furniture, engine blocks, Lawn mowers and general garden machinery.
Data and Safety Sheets available on request