Dulux Weathershield Quick Dry Satin Colours 750ml
Product Description
Weathershield Quick Dry Satin from Dulux provides an attractive mid-sheen finish and guarantees 10 year weather protection for exterior wood and metal provided surfaces are in good condition before application. The weatherproof paint film is mould resistant to minimise staining and flexible to resist cracking. This keeps your paintwork looking better for longer, compared to conventional Dulux gloss paints.
Application Description
Apply 1 or 2 coats with a brush. TIP: it is advisable to only use light colours on south facing resinous wood. Apply only in dry conditions, above 10°C and when bad weather is not forecast.
- Satin finish
- Coverage: Up to 18m2/litre
- Leave 6 hours to dry. Newly painted doors and windows should not be closed until paint is fully dry.
- 2 Coats
Tips & Advice
1. Preparing the Surfaces
Ensure surfaces to be painted are clean (no dirt, grease or flaking paint) and dry. Sand down the surface to remove any sheen. Refer to health, safety and environmental information. Areas affected by mould, algae, fungi or lichen should be treated with an appropriate fungicidal wash. Prepare bare wood with Weathershield Exterior Preservative Primer+ BP wiping off any excess. Prepare bare metal with Dulux Primer & Undercoat for Multi Surfaces. Surface defects should be repaired using the appropriate Polycell product.
2. Cleaning
Remove as much of this product as possible from the brush with a cloth and then wash with water.
3. Storing
Store paint in dry conditions and protect from extreme temperatures.
MPN:
5362495
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.
