Dulux Trade Weathershield Stabilising Primer 5L
A solvent-based primer specifically formulated to seal unstable areas which remain powdery and chalky after the surface has been thoroughly prepared for painting with Weathershield Masonry Paints.
Key benefits:
- Seals and stabilises
- For powdery masonry surfaces
- Ready for use
- Coverage: up to 12m2 per litre
- Touch dry: 8-12 hours
- Recoatable: 16-24 hours
- Thinning not generally required
To get the best results, ensure surfaces to be sealed are sound, clean and dry. See Dulux Trade Datasheet 304 for full information before use. Before surface preparation, read the Health & Safety information about old lead paints.
SHAKE CONTAINER VIGOROUSLY BEFORE USE. When the surface has been fully prepared any areas that remain powdery and chalky should be sealed with a coat of Weathershield Stabilising Primer. When fully dry apply 2 coats of the selected Weathershield Masonry Paint. Weathershield Stabilising Primer should not be used as a general purpose sealer on normal or sound surfaces (i.e not powdery and chalky after the surface has been thoroughly prepared). New or sound bare surfaces should only be sealed with a thinned first coat of the masonry paint itself.
After use, remove as much paint as possible from brushes before cleaning with brush cleaner.
