Dulux Trade Weathershield Quick Dry Exterior Gloss Pure Brilliant White
Dulux Trade Weathershield Quick Dry Exterior Gloss in Pure Brilliant White
DISCONTINUED Only 1 x 1 Litre available
For tinted colours please see related products.
A water-based gloss finish which is part of a paint system specially developed to give long lasting protection to exterior wood. The Weathershield Quick Dry Exterior Gloss system will provide extensive protection for up to six years if correctly applied as per the instructions for use. Contains a fungicide to inhibit mould growth on the paint film and help it stay cleaner for longer.
Key benefits:
- 6 year all weather protection
- Tough and durable protection
- Coverage: up to 16m2 per litre
- Coverage: up to 16m2 per litre
- Touch dry: 2 hours
- Recoatable: up to 4 hours
- This product should not be thinned
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces must be fully dry). See Dulux Trade Datasheet 534 for full information before use. Before surface preparation read the Health & Safety information about old lead paints.
STIR THOROUGHLY BEFORE USE. Prime all bare wood with 2 coats of Weathershield Preservative Primer +(BP) followed by 1 coat of the appropriate coloured Weathershield Quick Dry Exterior Undercoat. Finish with 2 coats of Weathershield Quick Dry Exterior Gloss. Where a special process colour is to be used or a strong colour change is required, additional coats will be required (see appropriate Dulux Trade colour card). Allow a minimum of 2 hours before overcoating Weathershield Quick Dry Exterior Undercoat. Allow up to 4 hours before applying a second coat of Weathershield Quick Dry Exterior Gloss. For best colour consistency, purchase sufficient tinted paint for each job including touch-in at one time from the same source.
After use, remove as much paint as possible from brushes before cleaning with water.