Dulux Trade Weathershield Multi-Surface Fungicidal Wash 5L
Dulux Trade Weathershield Multi Surface Fungicidal Wash 5 litresDesigned for cleaning all bare or painted wood and masonry surfaces contaminated with moulds, algae and lichen. Suitable for brush application only.
- Ready for use
- Kills algae and mould growth
- For wood and masonry
- Coverage: up to 25m2 per litre, but will vary considerably depending on absorbency of the surface
- Touch dry: 2-4 hours. Leave on the surface for 24 hours, then rinse with clean water to remove dead growth/residues
For the best results, remove as much mould algae or lichen as possible by scraping and brushing, before treating. Weathershield Multi-Surface Fungicidal Wash will only be effective on surface growths. Where mould growths have been trapped between previous coats, all existing coatings need to be removed. See Dulux Trade Datasheet 803 for full information.
SHAKE THOROUGHLY BEFORE USE. Apply by brush to all affected areas. Leave for 24 hours then thoroughly rinse and scrub with water to remove residues and dead growth; failure to do this may result in discolouration of subsequently applied coatings. Repeat the process if necessary. On badly affected areas the use of high pressure water-hosing may be necessary to remove all organic growth completely. Do not apply in wet weather.
After use, remove as much wash as possible from brushes before cleaning with water.