Dulux Trade Stain Block Plus
Dulux Trade Stain Block Plus
A water based 2-in -1 problem solving primer, that seals and binds surfaces as well as blocks common stains.
Key information:
Formulation: Water-based
Coverage: Up to 14m² per litre
Touch dry: Dependent upon temperature and humidity
Recoatable: 6-8 hours. Note - this product can usually be recoated within 6-8 hours but on very porous surfaces a longer drying time may be required.
Pack sizes: 1L, 2.5L, 5L - please choose size above
Thinning: This product does not require thinning.
Location: Interior
Application: Brush, Roller
Key benefits:
System information:
To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
After suitable preparation apply 1 coat of Stain Block Plus to all bare or stained surfaces and allow to dry. Two coats will be necessary for difficult stains.
After use remove ass much paint as possible from brushes before cleaning with clean water
Top Trade Tip
When blocking stains caused by water or damp make sure the original cause of the problem has been rectified. When Dulux Trade Stain Block Plus is applied initially it will draw the stain into itself and then seal it. This is not a defect.
A water based 2-in -1 problem solving primer, that seals and binds surfaces as well as blocks common stains.
Key information:
Formulation: Water-based
Coverage: Up to 14m² per litre
Touch dry: Dependent upon temperature and humidity
Recoatable: 6-8 hours. Note - this product can usually be recoated within 6-8 hours but on very porous surfaces a longer drying time may be required.
Pack sizes: 1L, 2.5L, 5L - please choose size above
Thinning: This product does not require thinning.
Location: Interior
Application: Brush, Roller
Key benefits:
- Seals powdery, dry and friable surfaces, including limewash and distemper
- Blocks stains caused by water, ink, smoke damage, grease etc.
- For plaster surfaces.
System information:
To get the best results make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
After suitable preparation apply 1 coat of Stain Block Plus to all bare or stained surfaces and allow to dry. Two coats will be necessary for difficult stains.
After use remove ass much paint as possible from brushes before cleaning with clean water
Top Trade Tip
When blocking stains caused by water or damp make sure the original cause of the problem has been rectified. When Dulux Trade Stain Block Plus is applied initially it will draw the stain into itself and then seal it. This is not a defect.
Customer reviews
MPN:
5183284
Brand:
Dulux
Product Code:
5183284
Weight:
1.2kg
