Typical dispatch 2-3 days on a 24hr service (excl. wknd’s). For expedited delivery please call us.


Technical Support Line 01753 684084

Dulux Trade Pyroshield Matt Pure Brilliant White 5L

Unavailable - please see Thermoguard Safewalls or Bollom Flameguard Ultra Vinyl Matt for alternatives or call us on 01753 684084.
MPN: 5556023
£83.14 (excl. VAT)
£99.77 (inc. VAT)
You can earn 99 loyalty points with this purchase

Dulux Trade Pyroshield Matt Pure Brilliant White 5 Litres

Pyroshield Matt from Dulux Trade is a water-based flame retardant finish that upgrades wall and ceiling to fire classification Class 0 using the specified system depending on the substrate classification (tested to BS476, parts 6 and 7).

Colour: Pure Brilliant White. For tinted colours see related products.

Application information

  • Coverage: 12m² per litre
  • Recoatable: 2 - 4 hours
  • Thinning: Thinning is not usually required

    Key benefits
  • Flame retardant
  • upgrades fire classification BS476
  • Easy application and a stunning smooth finish
  • Water based

System information

Surfaces must be thoroughly cleaned to remove all dirt grease and any surface contaminantion that could affect the adhesion of subsequent coatings. Remove all blistered, poorly adhering or otherwise defective coatings. Any surface defects should be filled with the appropriate Polycell Trade Polyfilla. Spot prime all such exposed areas with Pyroshield Durable Matt from Dulux Trade. Ensure surfaces are fully dry before finish coating.

Please note: For any flame retardant system to be successful it is paramount that all previous coatings are stable and firmly adhering to the underlying substrate.

When applying water-based systems to previous coatings that are known, or suspected to be, solvent-based or which exhibit a very glossy or very hard impermeable surface the following preparation is recommended. Thoroughly clean down the surfaces to remove all dirt grease and surface contaminants; whilst wet, to produce the necessary key for good adhesion by rubbing down sound areas with waterproof abrasive paper or pads and feather broken edges of existing coatings. Rinse off and allow to dry. Allow the surface to fully dry before proceeding.

This product can be applied over new work, in which instance a mist coat is advised.

product review overlay image

Customer reviews

No reviews left yet
Write A Review

No reviews have been left for this product, be the first to leave a review
Dulux Trade
Product Code:
Widget Image