Dulux Trade High Performance Floor Paint Colours 1.78L
Dulux Trade High Performance Floor Paint 1.78L (need separate activator)
A 2 pack water-based formulation suitable for environments including heavy commercial. Up to 6m² per litre.
Please be aware that this product should be purchased with Dulux Trade High Performance Floor Paint Activator 3.22L - see related products below
Key information:
Coverage: 6m² per litre
Touch dry: 4-6 hours dependent on temperature and humidity
Recoatable: 16-24 hours
Thinning: Normal use (not to be exceeded) 1 part clean water to 10 parts of paint
Key benefits:
Water-based 2 pack system.
Suitable for use in heavy commercial environments.
Hard wearing durable finish for optimum performance.
System information:
Supplied in correct proportions. Add all of the Base to the Activator container and mix thoroughly for at least 5 minutes, until the product is smooth and even.
Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration.Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax, etc. Use a suitable oil and grease remover to clean the surface if necessary. New surfaces must be brushed with a stiff brush to remove all loose surface material. Porous surfaces must be sealed with a thinned first coat.
A 2 pack water-based formulation suitable for environments including heavy commercial. Up to 6m² per litre.
Please be aware that this product should be purchased with Dulux Trade High Performance Floor Paint Activator 3.22L - see related products below
Key information:
Coverage: 6m² per litre
Touch dry: 4-6 hours dependent on temperature and humidity
Recoatable: 16-24 hours
Thinning: Normal use (not to be exceeded) 1 part clean water to 10 parts of paint
Key benefits:
Water-based 2 pack system.
Suitable for use in heavy commercial environments.
Hard wearing durable finish for optimum performance.
System information:
Supplied in correct proportions. Add all of the Base to the Activator container and mix thoroughly for at least 5 minutes, until the product is smooth and even.
Do not mix part units. Badly activated or incorrectly mixed materials will affect performance and may cause early failure or discolouration.Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax, etc. Use a suitable oil and grease remover to clean the surface if necessary. New surfaces must be brushed with a stiff brush to remove all loose surface material. Porous surfaces must be sealed with a thinned first coat.
MPN:
5090873
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product.
