Cuprinol UV Guard Decking Oil 5L
- Advanced weather protection
- Hardwearing formulation
- Replaces natural oils
How much do you need?
A 2.5L can covers up to 20m2 with 2 coats brush applied or 1 coat spray applied. A 5L can covers up to 40m2 with 2 coats brush applied or 1 coat spray applied. Coverage can vary depending on application method and the condition and nature of the surface.
Coverage quoted with 2 coats.
Coverage can vary depending on application method and the condition and nature of the surface.
Brush application: Shake can well before and frequently during use. Brush on evenly along the grain. Apply a second coat if required once the first coat has penetrated into the wood. Do not allow puddles to form. Spray application: Shake can thoroughly before pouring contents into the Cuprinol Fence Sprayer or Cuprinol Power Sprayer. Refer to the sprayer user guide for full instructions before every use. Cover any surfaces nearby in case of overspray. Any overspray should be cleaned up immediately (whilst still wet) with water and household detergent. Do not apply in temperatures below 5C, in damp conditions or if rain is likely before product has dried.
Up to 6 hours. Drying times can vary depending on the nature of the surface and the weather conditions.
Remove as much oil as possible from equipment before cleaning with water. Do not use or store in extremes of temperature.