Avenue 1 Pack Epoxy Line Marking Paint

A single pack solvent based epoxy ester line marking paint. Typically used for delineation of car parks, airports, warehouses, distribution centres, docks etc.

• Appearance of Dried Film: Matt
• Drying time @20°C: Touch dry: 10 minutes / Traffic Time: 20 minutes / Recoat: 1-2 hours
• (cure times will vary according to temperature, film thickness, air temperature, humidity)
• Wet film thickness: 288 microns
• Dry film thickness: 150 microns
• Flash point 4°C (BS EN ISO 3679 Closed Cup)
• VOC Content: 419 grammes per litre ± 5 % (depending on colour)
• Volume Solids: 52 ± 2% (depending on colour)
• Skid Resistance: 36 SRV
• Thinning: Supplied at spray viscosity and should not need thinning. If required a maximum of 5% by volume of
• S1 Thinner may be used.
• If applying to bituminous based surfaces the product should not be thinned.